Why not sign up to our product newsletter and keep up to date with the latest product news & support.
We will send you notifications of any firmware upgrades and add-on features the minute they become available.
RF Power Meter
Affordable RF power measurements
Retail: (USD) $149.00
Sensitive and precise. The RF Power Meter takes the guesswork out of uplink and downlink power and antenna measurements. Calibrated on all bands used in RC modeling, from 35MHz through 5.8GHz
- Affordable RF power measurements, a fraction of the cost of similar equipment
- Measure pulsed, and continuous RF power levels (e.g. UHF, and A/V Downlinks)
- Calibrated on all common bands used for modelling, and especially FPV
- 50dB of dynamic range (-50dBm -> 0dBm without the external attenuator)
- Readout in mW, or dBm
A unique device, introduced to allow the modeling community to precisely measure transmitter power levels, and even test and compare antennas.
The ‘600mW’ transmitter installed on your FPV/UAV system, what does it really emit? The ‘2dBi Omni, coupled to it, does it really work as specified? These kinds of questions are often considered when theoretical range calculations don’t match reality, but answering these questions can be expensive.
Connect via the supplied 30dB SMA attenuator to high power A/V transmitters, and the power output level is displayed directly on the integrated LCD display. +/- 0.5dB accuracy even on the 5.8GHz band.
Install in place of your A/V receiver, with the transmitter at fairly close range, and measure the power level that your receiver will see. This includes the Transmitter power level, connector losses, transmitter antenna gain, free space losses, and receiver antenna gain. Testing with a system on the ground is much safer than testing while airborne.
Connect to a directional antenna, and measure the actual radiation pattern.
Production/After Sales Service
Useful on a small production line, to confirm the output power of FPV/UAV equipment, and also as a tool to test returned equipment.
Please note - specification could change at any time
- Model Code: RFPWR1
- Model Name: RF Power Meter
- Category: Accessories / Tools
- Initial Release: 28 Nov 2013
- Latest Firmware: 0
- Dimensions (LxWxH): L=90mm x W=52mm x H=19mm
- Weight (Grams): 40g
- Supply Voltage: 6 - 16V DC
- Power Consumption: 100mA
Please see the Firmware & Downloads Tab for User Manuals
First level support for ImmersionRC products is handled by the retailer from which you purchased your product. Please contact them directly in case of any question or problem. As an OEM ImmersionRC does not offer direct support to end users, either via email or on a forum, the retailer is responsible for that.
Note that a very active forum covering all aspects of FPV flight may be found here:
- FPVLAB FPV Forum (English)
A forum section specific to ImmersionRC's products can be found below, in this forum end users discuss their experiences and use of the ImmersionRC products and/or receive support from other users:
- ImmersionRC support - FPVLAB (English)
Firmware / Manuals / Downloads
Please signup for our latest product firmware updates
|v 1.40||5 Mar 2014
ImmersionRC Tools v1.40Full Details >