A DVR Created Purely for FPV
The internal DVR on FatShark Dominator Goggles is ‘ok’, but it doesn’t come close to the quality that PAL/NTSC can offer.
Instead of the MJPEG compression used in the Dominator, the PowerPlay uses x264 (AVC) compression, with a much higher bit-rate.
The 30fps frame rate of the Dominator is also doubled to 60fps, which is essential for capturing fluid race footage.
Powers FatShark Goggles (with power switch)
h264 Recording, at up to 60fps
Built-in 6cm LCD display, showing recording + playback
USB-C Charging
2x 3.7V 18500 Cells (Not Included)
Accessories for Head, or Pocket Mounting
The Power Part…
PowerPlay’s Power section is a pair of two 3.7V 18500, Li-ion cells, that can power a Dominator HDO + rapidFIRE + DVR for up to 3 hours *.
To recharge, either use the built-in USB-C port for up to 1.5A charging, or simply pop out the cells, and replace with a freshly charged set.
The PowerPlay does not ship with batteries, but suitable 3.7V 18500 2040mAh cells are available from most vape shops, and are the same ones used in the FrSky X-Lite radios, so any decent FPV retailer will stock them.
* 3 hours with 2040mAh cells, not shipped with the product
* DO NOT USE 1.2V NiMH CELLS!
Head Strap
The PowerPlay ships with a head-mounting accessory pack. A quick-release clip mounts on the rear of the standard goggle headstrap, and the new included top-strap ensures a comfortable fit.
A short ‘Y’ cable connects power, A/V, and the fan connector.
The rear-mounted DVR has the advantage of letting people standing behind you see what you, the pilot, is seeing.
A longer version of the cable is also supplied, for those who would rather keep their battery/DVR in a pocket, and keep weight off of the head.
Show off your Micro/Whoop footage
Quads which are extremely lightweight do not want the extra weight burden of an HD camera system. High quality SD recordings of these amazing indoor flights are therefore of interest.
PowerPlay delivers this quality.
SPECIFICATIONS & SUPPORT FILES
Essential Specs, User Manuals, Firmware & Downloads
PRODUCT SPECIFICATIONS
Retail Price ($USD): $89.00
Power: 2x 3.7V 18500 Li-ion cells, NOT INCLUDED (without protection circuits)
Power Switch: Yes… powers both the DVR, and the Goggles
Video File Format: h264 (AVC)
Video File Resolution: 720×576 (PAL), 720×480 (NTSC)
Video Data Rate: ~15Mbps (PAL), ~8Mbps (NTSC)
Black Flashy: None
INCLUDED ACCESSORIES
1x PowerPlay DVR
1x Head Strap Clip
1x Over-head Strap
1x Replacement fan cover mounting kit w/Strap clip
1x Short DC/AV ‘Y’ cable for head-mounting use (incl. Fan Power)
1x Long DC/AV ‘Y’ cable for pocket use (incl. Fan Power)
USER MANUALS
FIRMWARE
BETA FIRMWARE
(Unofficial – Full & final testing may not have been carried out on beta release firmware, use with caution!)
UTILITY SOFTWARE
No downloads found.