600mW 5.8GHz A/V Tx

One of the most popular A/V transmitters in the FPV hobby. An efficient, lightweight (heatsink and fan-free) transmitter, which packs quite a punch.

See latest 600mW A/V Tx stuff

Stay Legal…

Many A/V transmitters sold for FPV use have channels which fall outside of the legal bands (ISM, and Amateur Radio). The channel set used ImmersionRC and FatShark all fall within the legal bands, and will not raise the eyebrows of the authorities.

Note that a license may be required to operate this transmitter in certain countries.

 600mW (27.5dBm, +/- 1dBm) of clean output power
 SMA Antenna connector, with supplied 5.8GHz Rubber-duck antenna
Frequencies: 5740, 5760, 5780, 5800, 5820, 5840, 5860MHz
 All Frequencies within legal bands (ISM + Ham Radio)
Not affected by 2.4GHz R/C radios!
 May require a license to operate

Plug and Play

The 600mW transmitter includes a built-in super-quiet switching regulator, which powers not only the transmitter, but a connected 5v camera. No need for external step-down supplies, and no need for filtering, or a second battery. Run the 600mW directly from your flight pack!

Supplied connectors are standard for all ImmersionRC/FatShark equipment, including cameras, and OSDs. Plug and Play Fly!

 

Full FatShark Compatibility

The ImmersionRC 600mW 5.8GHz Tx was designed for full compatibility with all 5.8GHz FatShark FPV Goggles.

The Attitude series include built-in 5.8GHz receivers, with the same channels as the 600mW Tx.

The Dominator series, with swappable RF modules, support the same channels with the ‘5G8 Alpha’ RF module.

Circular Polarization Upgrade

The 25mW 5.8GHz Tx is shipped with standard ‘rubber-duck’ style linearly-polarized antennas. Upgrade to circular-polarized antennas to increase usable range, especially in urban environments.

The SpiroNET Omnis, quite possibly the most popular CP antenna in the FPV world, are just the ticket.

5.8GHz RF loves to reflect off of surfaces (walls, the street, or a passing UPS truck), Circular Polarization ensures that the reflection is spinning the opposite way, and is does not create a ‘null’ at the receiver.

 

Extreme Range, CE-Legal Power

Install a SpiroNET 13dBi patch on the receiver to dramatically increase usable range. Even a 25mW 5.8GHz Tx can be used several km out when pointing a patch antenna at the model.

Install the patch on an antenna tracker for even better performance, ensuring that the directional patch is always pointing in the direction of the model.

SPECIFICATIONS & SUPPORT FILES

Essential Specs, User Manuals, Firmware & Downloads

PRODUCT SPECIFICATIONS

Retail Price ($USD): $69.00
Power Output: 28dBm (600mW)
RF Impedance: 50 ohms
Frequency, Band 1: 5740, 5760, 5780, 5800, 5820, 5840, 5860MHz
Audio: Stereo, Subcarriers on 6.0, and 6.5MHz
Modulation: FM, Audio and Video
Length: 50mm
Width: 23mm
Height: 15mm
Weight: 18g
Power Requirements: 2s-6s LiPo (6v – 25v)
Power Consumption: 3W

FIRMWARE

No downloads found.

BETA FIRMWARE

(Unofficial – Full & final testing may not have been carried out on beta release firmware, use with caution!)

No downloads found.

UTILITY SOFTWARE

Share this product with your friends!